mijia 1C dust bin

Product overview

Country of origin

China

Lead time

20 days

Last updated

Sep 15, 2026

Materials - main housing: Transparent high-impact ABS plastic, anti-drop, anti-aging, rigid structure, allows visual inspection of dust volume. - Sealing ring:*Elastic silicone rubber, good compression resistance, airtight seal to prevent dust leakage and suction loss. - Filter frame: Rigid ABS plastic. - Filter media: Pleated composite non-woven HEPA material, can capture particles down to 0.3μm; pre-filter nylon mesh to trap large hair and debris. - Buckle & handle: Reinforced PP plastic, withstand repeated removal and installation. 2. Intended Purpose - Integrated dust collection & air filtration module for Mijia 1C robot vacuum-mop (Model: STYTJ01ZHM). - Collect solid debris, fine dust, pet hair and lint during vacuum cleaning. - Filter exhaust air to reduce fine particle re-circulation into room air. - Replacement spare for cracked bin, broken buckle, deformed silicone seal or clogged/worn filter. Only for dry dirt collection; not for liquid, wet sludge or sharp large fragments. 3. Advantages 1. 600ml large capacity: Reduces frequent emptying, suitable for medium and large households. 2. Transparent bin design: Directly observe dust fill level for timely cleaning. 3. Full silicone sealing: Minimize air leakage, preserve 2500Pa suction power, prevent dust spillage during taking out. 4. Washable HEPA filter: Reusable after rinsing, lowers long-term accessory cost. 5. Quick-release snap structure: Simple pull-out design, one-handed operation for dust emptying without tools. 6. Precision fit: Direct plug-and-play, no modification required. Comes with filter in one assembly. 4. Important Technical Details - Filter: Washable HEPA, intercept particles ≥0.3μm - Compatible robot: Mijia 1C STYTJ01ZHM - Installation: Pull out from the top compartment of robot; filter can be detached from dust bin individually. - Maintenance: Rinse bin and filter with cold clean water; fully air-dry completely (≥24h) before reinstallation. - Recommended service cycle: Clean filter every 2 weeks; replace filter every 6–12 months, shorter cycle for heavy pet hair environment. - Limitations: - Do NOT use hot water, bleach, strong detergent or disinfectant; will damage HEPA fiber and silicone seal. - Never install damp filter; moisture causes mold, odor and suction drop. - Not for wet garbage; moisture inside bin may damage robot fan. - Working principle: Air mixed with dust enters the dust bin. Large debris settles inside the bin, fine dust is trapped by HEPA filter, and purified air discharges out of the robot.